Care Process Instrument

The Series C2000Low Cost Differential Pressure Gauge are low-cost, diaphragm operated, mechanical pressure gauges,
Series C2000 is for measuring fan and blower pressures, filter resistance, furnace draft, pressure drop across orifice plates, monitoring blood and respiratory pressures in medical care equipment With simple, frictionless movement parts, It can quickly indicate low air or non-corrosive gas pressures, either positive, negative or differential It can resist shock, vibration, and over-pressures
Features
Mount in Industry Standard holes
Shock Resistance
It can sustain vibration and in overpressure
Die-cast Aluminum Housing

Accessories
Two 1/8 NPT barbed fittings, two 1/8 NPT plugs, and three mounting tabs and screws

Warranty
2 years

Accuracy
+1- 2% full scale (+/- 3% an -0 and +/-4% on -00) throughout range at 70 DegreeF (21 DegreeC)

Housing Material
Die-cast aluminum case and bezel (ABS for P2000), with acrylic cover

Additional Information:

• Item Code: G2000

This is Box for mounting the magnelic Guages.available in All SS ,MS /SS.
wall mount, Concealled type and any Other special Mounting requirement.

Overview

• Select the Dwyer Magnehelic gage for high accuracy - guaranteed within 2% of full scale - and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures - either positive, negative (vacuum) or differential.
• The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems.
• It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Note

• May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.

Accuracy

• +-2% of FS (+-3% on - 0, -100 Pa, -125 Pa, 10MM and +-4% on - 00, -60 Pa, -6MM ranges), throughout range at 70 DegreeF (21.1 DegreeC).

Service

• Air and non-combustible, compatible gases (natural gas option available).

Wetted Materials

• Consult factory.

Standard Accessories

• Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)

Agency Approval

• RoHS

Standard Accessories

• Two 1/8 NPT plugs for duplicate pressure taps, two 1/8 pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)

Low temperature models available as special option.For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.
Low temperature models available as special option.For applications with high cycle rate within gage total pressure rating, next higher rating is recommended. See Medium and High pressure options at lower left.

The Series S2000 Differential Pressure gauges are low cost, diaphragm operated, mechanical differential pressure gauges that may be used in all applications where the Dwyer Magnehelic brand gauges may be used. The Sensocon Series S2000 Differential Pressure Gauge can be used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Standard applications include monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, and cabinet purging along with many others.

Features

• Mounts in Industry Standard Holes
• Die Cast Aluminum Housing
• ABS Housing (P2000)

Accuracy

• full scale (+/- 3% on -0 and +/- 4% on -00) throughout range at 70 DegreeF (21 DegreeC)

Accessories

• Two 1/8" NPT barbed fittings,two 1/8" NPT plugs, and three mounting tabs and screws

Approvals

• RoHS, CE

Additional Information:

• Item Code: S2000

The Series A4 Digital Diff. Pressure Indicator Cum Controller is a patent pending microprocessor based pressure controller for positive, negative, and differential pressure as well as velocity and flow. The Series A4 differential pressure controller includes (2) 8A SPDT relays, and an optional digitally scalable 4-20 mA output. The programmable control allows full configuration of variables such as setpoints, dead band, engineering units, flow coefficients, and more. The programming is done from a user-friendly menu on the OLED display or with an Opti Link(TM) programming key. The OLED also displays the exact setpoints or other user defined variables during normal operation. Furthermore, the menu structure can be customized by moving variables to different menu levels to accommodate user preferences. Compared to other mechanical products, the Series A4 digital differential pressure controller has a significantly reduced depth, an improved look, and better performance.

Loop Resistance

• 750 Max (for internally sourced power); 1800 Max (for externally sourced power of 36 VDC

Relays

• (2) SPDT 8 Amps @ 250 VAC, 5A @30 VDC

Response Time

• Display 4 Digit, red LED, 1/2" (12.7 mm) digits; OLED programming display

Agency Approvals

• ETL, CE

ALL SS Magnehelic Gauge Probe, it''s Flush mount sensor. available in diff. desing.